The Mighty Cord Dogbone RV Power Cord Adapter # A10-3050FBK that you referenced has 50 Amp Female and 30 Amp Male connectors. This allows connecting a 50-amp RV power inlet to 30-amp service.
For a similar product that allows connecting a 50-amp RV inlet to BOTH 30-amp and 15-amp service you can use Camco Power Grip RV Power Maximizer # CAM55025. This allows connecting to both 15 and 30-amp service at the same time to provide 45-amps total current to the RV. Each power connection can... view full answer...
Along with your Mighty Cord 30 Amp Twist Lock RV Power Inlet # A10-30INVP you can use their mating replacement female Twist Lock Connector # A10-30FDT. If you care to add a weather-resistant locking ring you can also use part # A10-30CV. view full answer...
For all intents and purposes the only difference between the Mighty Cord Replacement RV Power Inlet # A10-30INBKVP and the # 277-000137 is going to be the color. One is white and one is black. view full answer...
We don't currently have the Furrion 30 amp power inlet in black, but we do have it in Stainless Steel # F30ITSSS if you want the Furrion brand name.
If you want something closer to the # 431861 in style we have the Epicord 30 Amp Twist Lock Power Inlet - Black # 277-000138 or the Mighty Cord Replacement RV Power Inlet - 30 Amp Twist Lock - Black # A10-30INBKVP. view full answer...
What I think you are asking is for what is commonly referred to as a dog bone, something with a 90 degree angle for your power cord that fits the 30 amp Mighty Cord Replacement RV Power Inlet, # A10-30INBKVP. That would be the Mighty Cord RV Power Cord Adapter, # A10-3030D90VP.
We have the Mighty Cord RV Extension Cord, 30 Amps at 15' in length, # A10-3015EH, or # A10-3025EH for 25' length and # A10-3050EH for 50'.
Please note the linked product review video below. view full answer...
Yes, if you have the "mousehole type" and want to modify/upgrade to the newer style then the Epicord 30-amp Twist Lock Power Inlet # 277-000137 is great choice. view full answer...
We don't carry any kind of blank that could be screwed on but you could a hard plastic sheet from your local hardware store and cut it to fit over the hole and then drill out the correct sized hole for the Mighty Cord Replacement RV Power Inlet # A10-30INVP in it. with this method you could use the same screw holes that you already have as well.
I recommend using some butyl tape # AL28FJ and non-sag sealant # AL28KV on the plastic blank to prevent any water from leaking in and damaging... view full answer...
Sounds like you are looking for something like the Mighty Cord Replacement RV Power Inlet # A10-50INVP which is designed for 50 amp twist lock connectors. We don't have just the door for this though.
For 30 amp twist lock we have the part # A10-30INVP. view full answer...
We actually have a selection of recessed gravity fill ports that you can use on your camper that are lockable. I will list them for you below.
Slide-Out RV Gravity Fill Inlet with Lockable Latch - Polar White # 37237525
Valterra Lockable RV Gravity Fill Water Inlet - White # A01-2002VP
Valterra Lockable RV Gravity Fill Water Inlet - Black # A01-2002BKVP
Valterra Lockable Dual RV Water Inlets - City Water and Gravity Fill - Plastic Valve - White # A01-2004VP
Valterra Lockable Dual RV Water... view full answer...
The Mighty Cord RV Power Cord Adapter Plug - 30 Amp Female to 30 Amp Male, # A10-3030DAVP, is used to adapt your RV's 30-amp, twist-lock power inlet for use with a 30-amp, standard power cord. If this meets the connection types you are needing for your application then yes. If your purpose for doing so is due to needing a longer electrical cord, then please ensure you are not increasing the resistance to a greater degree than what is safe. We do have the Mighty Cord RV Extension Cord... view full answer...
It sounds like you are looking for the Mighty Cord Generator Adapter for RV Power Cord part # A10-G30450VP which has both the 50 amp female and 30 amp male 4 prong twist lock plugs that you need. If this is not what you were looking for then please just let me know. view full answer...
I checked directly with SmartPlug, and their TV/internet inlet with the Coaxial Connector does come in white. The correct part for you is the following:
- SmartPlug RV TV/Internet Inlet - 1 Coaxial Connector - White # SM78VR view full answer...
What I understand is that you are wanting to install a 30 amp RV receptacle at home, same as you would have on an RV power pedestal at the campsite. This type outlet is best sourced locally at your nearby hardware store. You will need to use at least 10 gauge wire for this. However, if you already have a 15 amp outlet available in your barn, you can use the Mighty Cord RV Power Cord Adapter that mates a 30 Amp Twist Lock Female to a 15 Amp Male, # A10-1530DBK. This allows you to easily... view full answer...
The closest thing we have is the Mighty Cord RV Extension Cord - 30 Amps which is not a twist lock. The female end simply plugs straight into your RV 30 amp outlet and then the male end plugs into your power hookup. This comes in 10 foot length # A10-3010EH and 25 foot length # A10-3025EH. I attached a demonstration video for you to check out. view full answer...
SmartPlug labels their parts backwards so I assume you're looking for the SmartPlug Connector Plug Assembly for RV Power Cords - 30 Amp Female # SM47FR, which would go on the power cord.
If you're looking for the inlet then you would need one of the following color options:
White # SM57FR
Gray # SM37FR
Black # SM97FR
Stainless Steel # SM24FR view full answer...
We do not have an extra/replacement coax port for the SmartPlug RV TV/Internet Inlet # SM88VR, nor do we have a plastic version with 2 coax ports. However, if you already have the SmartPlug RV TV/Internet Inlet # SM58FR, you can remove one of the coax ports and switch it to the plastic SmartPlug.
I will also say that the SmartPlug RV TV/Internet Inlet # SM58FR only weighs just over a pound, so it would not be too heavy for an RV sidewall. view full answer...
The best way to keep your inlets and valves from freezing on your RV is to make sure they are properly insulated. You can likely use some foam pool noodles or some sort of pipe wrap on the inside of the RV over the water inlet in order to help with insulation.
The other solution you could potentially use is the Valterra Self-Regulating Heating Cable for RV Plumbing # W01-1572 and wrap that around the pipes to help make sure that they're staying warm. This cable has an integrated thermostat... view full answer...
We have a wide selection of water inlets and the right one for your camper is going to depend on the size of the cutout and type of connection you have. For example, the Valterra Flush Mounted Telescoping Water Inlet for RVs # R920TW is 3-3/8" by 3-3/8" with a 1-3/8" x 1-1/4" barbed inlet.
I have added a link to a video review of that inlet, as well as a link to our selection of water inlets for you to check out. view full answer...
That specific model has been discontinued by SmartPlug and replaced with the SmartPlug RV Internet Inlet # SM38FR, which has a second port that you could add in a tv inlet later on if you wanted to. view full answer...
Go To Results